Frame fabricated of #18 gauge,
type 304 18-8 stainless steel, fully welded one piece construction
with a #4 satin finish. Mirror projects from wall 4 inches at
top and tapers to 1 inch at bottom for use of wheelchair persons.
Mirror surface to be 1/4 inch polished plate glass with electrolytic
copper plating. Back plate shall be of #20 gauge galvanized steel
which assembles to frame, concealing theft resistant mounting.
Looking for something you can't find? Not sure which product best
fits your needs? Call us at 800-619-4737 or email us with your special
needs at info@qnsdistributors.com
U711
Stainless Steel Channel Framed Mirror
Mirror frame fabricated of
#20 gauge stainless steel, one piece formed 1/2 in x 1/2 in x
1/2 in channel, with corners precision mitered and reinforced
to a hairline joint. Entire frame to be #4 brushh satin finish.
No.1 quality, 1/4 in polished plate glass mirror, silver coated
and sealed with electrolytic copper plating. Back plate of #20
gauge pre-coated steel which secures padding and watter resistant
fillers behind mirror.
U716
Stainless Steel Channel Framed Mirror with Shelf Combination
Channel frame mirror assembly
same as U711. Shelf furnished as one piece, welded to full width
of frame. #18 gauge stainless steel angle gussets permanently welded
to ends for vertical support. Shelf projects 5 inches with sides
turned down 1/2 inch. Front has 1/2 inch return to form rolled edge
for rigidity. Entire surface finished to match mirror frame.
Shelf is fabricated of #18 gauge, type 304 18-8
alloy stainless steel. Brackets are fabricated of #16 gauge stainless
steel and permanently welded to shelf. Brackets are located 30 inch
on center. Finish is #4 brushed satin on all exposed surfaces and
vinyl protected. Front edge of shelf is turned down and returned back
under 1/2 inch for added protection. All shelves are 5 inch deep.
Call for other sizes and depths not listed.
For size and spec cut sheet, click
here.
Click the photo of the model in which you are interested to find the link to the Technical Data Sheet
The mirrors shown on this
page are the most popular sizes and styles. We have hundreds of
other sizes and styles available from our catalog. Email us for
your special sizes or needs at info@qnsdistributors.com
A & J Washroom Accessories carries a
complete line of architectural and janitorial washroom accessories. Our
soap dispensers can be surface mounted or recessed and can use liquid,
lather or powder soap. Paper towel dispensers can handle C-Fold, Multifold
or Roll . We carry Jetair electric hand dryers with brushless motors,
adjustable or automatic timers and adjustable depth of field sensors.
A & J also carries a complete line of waste receptacles, ashtrays,
tilt mirrors and cabinets, toilet tissue dispensers, shelves, shower seats,
grab bars and other janitorial, bath and security accessories.
QNS Distributors has been
servicing the needs of commercial and industrial accounts since 1971.
We offer a full line of production
and warehousing products by industry leaders, Akro-Mils and Molded Fiber
Glass Tray Company. Whether your needs are large or small, QNS Distributors
can handle any orders.
QNS
Distributors 1375 Ebers St. San Diego, CA 92107-3812 Phone: 619-501-9602 Fax: 619-501-9603