U935/936 Surface Mounted Retractable Tub Seat

Seat is fabricated of solid one piece white high density polymers that is warp & water resistant. #18 gauge stainless steel tubing, type 304, 1 1/4 in square tubing makes the main frame of the seat. Anti-slip devices prevent seat from sliding on tub rim when in use. When not in use seat can be retracted to the up-right position against back wall.
Overall Size: 29 3/8 in w x 14 1/2 in d
Seating Area: 29 in w x 13 3/8 in d
U936 Same as above only side wall mounted instead of back wall. Dimensions differ slightly. Weight Capacity 250 lbs.

U930 Surface Mounted Corner Shower Stall Seat

U930 -Unit is fabricated of type 304 #16 gauge stainless steel with a #4 satin finish. Sitting area shall have all edges and corners beveled, welded, ground smooth and polished. A formed stainless steel support is provided inside seat for rigidity, completely sealed in double pan back for added support and appearance. Heavy duty stainless steel hinge is secured to wall surface with one leg welded to 1/8" thick bracket support. The back corner of seat is formed to a 45 angle.
Overall Size 15 in x 15 1/4 in x 15 in x 1 in thick

U930WP - Surface Mounted Fold-up Corner Shower Seat - Fabricated of 3/4" thick solid one-piece high-density polymer with beveled edges. Seat material will not support the growth of microorganisms, odors, mildew, etc. Heavy-duty stainless steel hinges allow seat to fold up when not in use with a stainless steel bracket on opposite wall to provide support. Handling of seat can be changed in the field to allow seat to fold up to the right or left hand side of corner. Seat material is the same as the U937-1A & U939-1A series. Overall Size 15 1/4 in x 15 1/4 in x 3/4 in thick

U931 Recessed Retractable Shower Seat

Seat is double pan reinforced construction and fabricated of type 304 #16 gauge stainless steel with a recessed heavy duty handle for convenient raising and lowering of seat. Concealed back is fabricated of #11 gauge stainless steel. Friction button catch holds seat in place when seat is in the up-right position
Overall Size 16 in w x 16 in h x 2 3/4 d
Wall Opening 15 1/4 w x 15 1/4 h x 2 5/8 d

U920 Retractable ADA Compliant Shower Bench

Seat: Fabricated of 3/4" thick, one piece polymers (white) with all leading edges having a radius to prevent injury. Seat is secured to frame with countersunk carriage bolts and acorn nuts. Tubing: Fabricated of #18 ga stainless steel with #4 satin finish. Main Frame: 1 1/4" diameter square tubing with capped ends. Underside has no exposed fasteners. Flanges: #18 gauge stainless steel with four (4) exposed mounting points.(Satin finish) Shower Bench: When mounted properly seat will be 18" above finished floor with 1/2 adjustability to level seat. Wall/floor design provides maximum support and equal distribution of weight. Seat has been tested to maintain a 1300 lb static load. Overall Size: 29 3/8"W x 12 7/8"D (seating area) 813mm x 406mm

U925 Handed Retractable ADA Compliant Stainless Shower Seat

Seat: Fabricated of #18 gauge #4 satin finish stainless steel welded to frame. All leading edges on slats have a radius edge for safety. Handing is required for this seat. Tubing: Fabricated of #18 gauge stainless steel with a #4 satin finish. Main Frame: 1 1/4” square tubing with capped ends. Underside has no exposed fasteners. Flanges: Fabricated of #18 gauge stainless steel with four (4) exposed mounting points. Under slung supports have a 1 1/4”OD. Leg Support: Fabricated of #18 gauge stainless steel one piece construction. Mounting Bracket: #16 gauge stainless steel “hat” style bracket with four (4) mounting points. Bracket acts as a guide to raise and lower platform. For maximum support bracket should be mounted on finished floor to accept load transfer. Seat will remain in an upright position when not in use by means of a spring clip. Overall Size: 32”W x 20 3/4”D (Seating Area) 813mm x 527mm Handing: U925-R: Right Handed U925-L: Left Handed

U928 Reversible, Retractable ADA Compliant Shower Seat for
Terrazo Base Showers - Surface Mounted

Seat: Fabricated of 3/4" thick, one piece polymers (white) with all leading edges having a radius to prevent injury. Seat is secured to frame with carriage bolts and is reversible in field. (Handing not required) Seat is 1 1/2" off finished wall. Tubing: #18 gauge stainless steel with a #4 satin finish. Main Frame: #18 ga stainless steel square tubing with capped ends Flanges: #18 ga stainless steel with four (4) exposed mounting points. Legs: #18 ga stainless steel with adjustable non slip feet. Guide Arm: Stainless steel that ensures full extension of support legs when in use and as a guide to raise legs when retracting. Overall Size: 32"W x 20 1/4D (seating area) 813mm x 514mm

U947CS Stainless Steel Shower Seat For Children

15" AFF